Glass mounted Dremel drill press with built in water feed and depth stop
watch a video of this tool in action: click here
This purpose made (patent applied for) drill press is designed to make the process of drilling a 6mm hole in the corner of sealed units simple, safe and accurate.
Dremel Drill Sold Separately (Not included in price)
- Suction Cup Mounting
- Corner Location Guides
- Depth Stop (Adjustable)
- Water Feed
- Durable Plastic Construction for use outdoors
- Light Weight
- Rubber Mounted (Will absorb excess pressure on cutter by operator)
- Precise location of hole every time
- Small Foot Print units as small as 6" or 150 mm can be drilled
Drill Press, Hose, Spray Pump & Spanner
After years of development the drill press is finally here, lightweight and easy to use the press makes light work of drilling the ventilation holes in the corner of the double glazed unit, the average time taken to drill each hole is just a few seconds using our new 6mm core cutter and adaptor (Click Here for details).
The press comes complete with a 3 litre adjustable water feed system and hose.
Drilling holes in units off ladders is never easy, especially when a water coolant is needed to cool the cutter, however with the drill press the process is quick and simple, the single handed operation means three points of contact can be maintained whilst drilling the unit.
Hard to reach units can also be drilled accurately and safely by attaching the press to the unit through an open window, the holes can then be drilled by reaching out of the open window to perform the task from the comfort of the inside of the property.
The positive location on the glass means the cutter can not skid or run, preventing costly sealed unit replacements due to operator mistakes.
The accurate depth stop can be used to ensure the cutter does not go too deep into the unit and touch the internal pane of glass. (The depth stop can also be set to perform the dry drill technique used by the trained engineers out there!)
So if you are worried about drilling the holes in the get the mist out condensation removal process this is the tool for you, or if you want to look more professional and work safely at all times this press ticks all the box's. IMPORTANT NOTE: THIS PRODUCT WILL NOT ATTACH TO LEADED UNITS, THE LEAD STRIPS ON THE GLASS WILL PREVENT THE SUCTION CUP LOCKING ONTO THE GLASS, IF USING ON LEADED UNITS YOU WILL NEED TO HOLD THE PRESS IN PLACE MANUALLY (IF WORKING OFF LADDERS THIS SHOULD BE DONE BY A HELPER).